oem m shape clear carbon fiber ir heat lamp 1300w 235v

oem m shape clear carbon fiber ir heat lamp 1300w 235v

Introduction

We built this OEM infrared heat lamp for the industrial world—specifically for setups that need serious heat in a seriously small space. It’s compact, but it punches way above its weight. We’re talking 1300W of power, running at 235V, with a clear carbon fiber filament bent into an M-shape. The whole point? To give you fast, focused infrared heat that gets right where you need it, even when the machine’s interior is a tight squeeze.

Let’s Get Into the Details

We chose 1300W because it delivers a strong dose of heat without pushing the filament past its limits. And the 235V rating? That’s just smart. It’s a common industrial voltage, so you can plug this right into your existing setup without having to rewire the whole control panel. That M-shape isn’t just for looks. It focuses the heat where you want it, cutting down on wasted energy. The result? A heating profile you can count on, every single time. And the clear carbon fiber filament? It heats up almost instantly and responds on a dime to voltage changes. That means quicker warm-ups and way better control during those repetitive cycles. Plus, the wattage and voltage combo keeps the current draw in check, which is easier on your terminals and switchgear.

The Materials and the Why

Carbon fiber is tough. It can handle the shock of heating up and cooling down over and over without cracking, which is exactly what you need on a busy production line. Because the filament is clear, there’s nothing blocking the heat. You get direct, unobstructed infrared transfer straight to the workpiece. And that M-shape again? It’s more than just geometry. It gives you two parallel heating paths in one lamp. That can make mounting a lot simpler and cut down on the number of fixtures you need. It also helps spread the heat more evenly across a long or narrow target.

Where It Shines

This is your go-to lamp when you’ve got a tight spot but still need a lot of heat. Think plastic forming, coating curing, drying components—anything that needs intense, focused warmth. The fast response time is a real time-saver. Since the element hits operating temperature quickly, you shave seconds off every cycle. The 235V wiring keeps things simple, and the tough filament just keeps going, even through constant start-stop cycles. Now, here’s the thing to keep in mind: a 1300W IR lamp runs hot. Make sure the housing and mounting hardware can take the heat. And double-check that your machine’s ventilation and insulation are up to the task, so everything stays within a safe operating range.